TAIG MANUAL MILL

 
Home
"CLASS" Products
Training Videos
Metals
Fractional End Mills
Metric End Mills
Decimal End Mills
Software
Oscar Jewelers Sys.
Hydro Torch
Machineable Wax
Shop Accessories
Maxnc Accessories
MAXNC CL Mills
MAXNC OL Mills
MAXNC Lathe
MAXNC Router
ER16 Collets
Taig Accessories
Taig CNC Mill
Taig Lathe
Taig Manual Mill		 The Taig Manual Mill Has A Long History Of being One Of The Most Dependable Manual Mills On The Market Today. This Is A Really Inexpensive Way To Add A lot Of Functionality To Your Shop!

E-MAIL US..... OR CALL.... (806) 381-8898

WE CARRY EVERY ACCESSORY FOR THIS LATHE!
   

                                        WE STOCK ONLY THE LATEST AND BEST MODELS!

                                        

TAIG MICRO MILL

The Taig Micro Mill,  can be purchased in several Configurations.   The most wanted seems to be this 2018 model that is ready to work upon arrival. 

2018 Pictured Here!

 Made in a combination of Steel and Hard Anodized Aluminum parts, this little mill will be around the shop to use for many many years!

X ais travel is 9.5", Y travel is 5.5" and the Z travel is 6". Total height is 21-3/8" and total depth is 16-3/4". The unit has 1/2"-20 lead screws on the X,Y, & Z axis. Spindle speed ranges from 525 to 5200 RPM.

The spindle accepts the standard 15 degree collets that Taig has used for years. Collet sizes range from 1/8" to 5/16". A 3/8 end mill adapter is available but not included in the package. The vise shown here is not included.  The 2018 Micro Mill  Is Only.... $669.00 (Retail , $710.00)

2018-ER Mill Same As Above But Accepts ER Collets ...Only...$745.99

2019...With 3-1/2" x 18-1/2" X Table With 12" X Travel....Only $785.99

2019-ER.... Mill Same As Above But Accepts ER Collets ...Only...$845.99

TAIG MICRO MILL CR SERIES

The "CR" means CNC Ready. This IS NOT a CNC mill. The CR series simply has the nema 23 motor mounts added for your convenience, bronze "squeeze" nuts on each axis to aid with backlash prevention... The spindle motor is upgraded to a 1/4 H.P.  Axis drive motors and controller are NOT included.

2019 CR Pictured Here!

These little units can do a lot of work if you want to build you're own CNC mill. Building your own CNC from this frame is pretty straight forward and can be completed in a week to ten days, depending on skill levels.

 2018 CR.... Only...$899.99  (Retail $940.00)

 2018 CR-ER ...Accepts The ER Collet Series... Only...$975.99

 2019 CR....With 3-1/2" x 18-1/2" X Table With 12" X Travel....Only $999.99

 2019 CR-ER... Only...$1,064.99

 

 

Need Help??? Feel Free To Call Us (806) 381-8898 Or E-Mail Us!